진동측정기VC-100Bearing Checker는 경제적이고 신뢰할 수 있는 장비입니다. 현장 환경은 먼지, 분진, 습기 그리고 경우에 따라서는 매우 고온의 작업 환경이 불가피합니다. 생체공학을 바탕으로 견고하게 설계된 Bearing Checker는 매일 험한 작업환경에서도 사용 가능합니다. 특히 강한 내충격성을 갖도록 설계되었습니다. Bearing Checker는 센서를 내장한 다용도 측정기입니다.
*모든 볼, 롤러베어링의 상태를 당사만의 Shock Pulse Method를 이용하여 측정합니다. *내장형 적외선 온도 센서로 Shock Pulse 측정과 동시에 표면 온도 측정이 가능합니다. *청음기로도 이용되어 불규칙한 기계소음을 청취할 수 있습니다. *신속하고 정확한 측정결과는 이해하기 쉽게 베어링 상태를 녹색, 황색, 적색으로 표시합니다. 최대 10개의 측정값이 저장되고 삭제도 용이합니다. *Bearing Checker는 이어폰 및 외장형 센서와 연결이 가능합니다. SPM 아답터를 설치한 세계 각국의 무수한 설비들도 Bearing Checker를 이용하여 측정 가능합니다. *사용하지 않으면 자동으로 전원이 꺼지며 다시 시작할 경우 가장 최근에 사용했던 Mode에서 시작할 수 있습니다
Technical specifications Frequency range: 10 to 1000 Hz Readings: RMS/peak/peak-to-peak Measuring range: Velocity 0.5–49.9 mm/s RMS (0.02–2.0 in/s RMS) Acceleration 0.5–49.9 m/s2 (0.05–5.1g) Displacement 0.5–99.9 μm (0.02–3.94 mils) Condition evaluation: according to ISO2372 and ISO10816 Part 2, 3, 4 >600 rpm Spectrum: linear, 200 lines, Hanning window, Hz/cpm, optical zoom, markers General functions: battery status display, transducer check, metric or imperial units, language independent menus with symbols, storage of up to 12 measuring samples Condition indication: green, yellow and red LED Measurement indication: blue LED Display: graphic monochrome, 64 x 112 pixels, LED backlight Keypad: sealed membrane (silicone rubber) Material, casing: ABS/PC Power supply: 2 x 1.5 V AA batteries, alcaline or rechargeable Battery life: > 20 hours of typical use Internal transducer: accelerometer type MEMS
|