|
* Specifications
The Hydro-Probe is a rugged, digital, microwave sensor designed to measure moisture in flowing materials.
Typical applications include moisture measurement in abrasive materials such as sand, aggregates and concrete.
Construction :
Body : Stainless Steel.
Faceplate : Ceramic.
Fixing : The sensor must be placed in the flow of material.
Bins and Silos : Install in the neck of a bin or underneath the gate. Standard and Extension Mounting Sleeves are available to suit different bin widths.
Conveyors : Secure in the flow of material
Analogue Outputs :
2 Configurable 0 to 20mA or 4 to 20mA current loop source available for moisture and temperature.
May also be converted to 0 to 10V DC.
Digital Inputs/Output :
2 configurable digital signals are provided for batch average start/stop or for moisture/temperature multiplexing purposes.
Digital (Serial) Communications :
Opto-Isolated RS485 2-Wire port.
Uses Hydro-Com communications protocol for read/write access to sensor parameters and values.
Ethernet and USB interfaces are also available.
Moisture Range : The sensor will measure up to saturation of material.
Material Penetration : Approximately 75 to 100mm dependent on material.
Operating Temperature : 0 to 60°C
The sensor will not measure in ice.
Refresh Rate : Outputs are updated 25 times per second.
Connections :
The sensor is fitted with a 10-way MIL-SPEC connector.
A 4, 10 or 25 metre, 6 twisted pair cable pre-assembled for connection to a waterproof junction box is available.
Power Supply : +15Vdc to +30Vdc. 4W.
* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr
입금계좌 : 국민은행 298737-04-004838 예금주 :아이에스테크주식회사
*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
- 배송료 : 10만원 미만시 착불 발송 됩니다.
배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.
- 퀵서비스 요청시 착불 배송이 원칙 입니다.
- 택배 마감 시간은 오후 4시 입니다.
- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.
- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.
- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.