센서 내장의 고정밀 소형 지진계 (SW-72 / SW-72R)고정밀 서보 타입 가속도계 채택. SW-72R은 SI 값과 진도를 측정 할 수있는 하이 엔드 모델입니다.
특 징 • 미소 지진을 검출할수 있는 3Axis 서보가속도 센서 채용 • 3개의 서보검지센서가 내장된 3축 무지향성 픽업 • 주파수 범위 0.3~10Hz. • 0.3%의 높은 선형성의 센서 채용 • 비나 먼지에 강한 IP 67 Water proof 타입 • 알람 부저 출력 및 알람 외부 리셋 • 아날로그 레벨 출력및 외부 디스플레이에 대한 컨넥션 지원
신뢰할 수 있는 정확도 2차 재해예방을 위한 제어출력이 정확하지 않다면 불필요한 제어 등 여러 문제를 불러 올 수 있습니다. 서보타입 검출기 내장으로 신뢰할 수 있는 정확도로 감지가 가능하며 표시, 경보단위를 1Gal 단위로 설정가능합니다. 대규모 지진에도 대응 3 방향에 검출기를 배치, 벡터 합성 한 가속도 값을 기록하여 어떤 방향의 움직임도 반드시 최대 값을 얻을 수 있습니다. 또 한 측정 범위는 3000Gal까지있어 대규모 지진에도 대응합니다. 방진방수 구조 지진에 의한 진동은 지반과 기초, 건물의 구조와 층에 따라 다릅니다. 중요한 시설 등을 지진으로부터 보호시에는 시설이 받을 지진의 흔들림을 정확하게 파악하기 위해서 동일한 기초에 지진 감시 장치를 설치하는 것이 이상적입니다. 야외 나 먼지 등의 환경에서도 설치할 수 있도록 IP67등급의 방진방수 구조를 채용하고 있습니다. 설치시간단축 기존 감지기들은 고정볼트 체결을 4 방향으로 하게 되어 있었으나 고정구멍을 2 곳으로 줄이고 절개식구멍을 사용하여 볼트 고정이 용이 합니다. 사용전원 또한 DC24V 으로 전원공급이 용이 합니다. 컴팩트한 디자인 감지기는 컴팩트한 크기로 디자인 되었으며 크기가 작을 뿐만 아니라 케이블컨넥터를 아래에 배치 모서리 없이하여 주위에 영향을 최소화하였다.
Item | SW-72 | SW-72R |
---|
Detecting method | Omni-directional, non-directivity detection by vector composed acceleration |
---|
Built-in pickup | Force-balance servo type accelerometer |
---|
Frequency range | 0.3 to 10 Hz ±10 % |
---|
Acceleration range | 0 to 5000 gal (3–component vector product) NS / EW direction : ± 3000 gal, UD direction : + 2000 to - 4000 gal |
---|
SI value measurement | Measurement range | - | 0.1 to 1500 Kine (3-component vector product) |
---|
Period range | 0.1 to 2.5 sec. ±10 % (natural period 0.1 sec. step, figured out 25 of 1-freedom simulation filters) | Damping | Can be set by 1 % step | Low pass filter | 30 Hz (-3 dB), 4th butterworth |
---|
A / D converter | 16 bit, 100 Hz sampling |
---|
Display | 7-segment LED, 4-digit display (xxx.x or xxxx) |
---|
Alarm | Alarm step | Upper limit 3-step (ALM1–3) individual setting | Upper limit 3-step (ALM1–3) individual setting (acceleration / seismic intensity / SI value) |
---|
Alarm setting Level | 0.1–999.9 gal *1 setting interval 0.1 step, 0.0 is alarm operation OFF | 0.1 to 999.9 (gal / seismic intensity / Kine) 0.1step, alarm operation is OFF at 0.0 | Alarm contact | 1a contact (photo MOS relay, COM common) | Contact rating | 200 V - 0.65 A (AC / DC peak value) | Relay | Made by Panasonic PD1a type (AQY277A) | Alarm reset method | a. Automatic reset by an internal timer 1–9999 sec. (setting interval : 1 sec., 0 is automatic reset OFF) b. External reset terminals (all steps reset by no-voltage a contact) |
---|
DC output | DC4 – 20 mA, load resistance < 300 Ω Full scale : 10 to 3000 gal (setting interval : 1 gal) | DC4 – 20 mA, load resistance <300 Ω , output content switching type (acceleration/ SI value / seismic scale by internal setting) Full scale value : settable optionally up to scale 7 |
---|
Serial I/F | Communication with SW-74 (conforms to RS422) / For maintenance (conforms to RS232C) | Communication with SW-74SI(conforms to RS422) / For maintenance (conforms to RS232C) |
---|
Clock | Accuracy | < 70 ppm (daily error of 6 seconds) |
---|
Time calibration | ±30 sec. correction (external input of no-voltage a contact) | Operational temperature range | 0 to + 50 °C |
---|
Operational humidity range | 10 to 100 %RH (non-condensing) |
---|
Power supply | DC24 V ± 10 % less than 10 W *2 | DC24 V ± 10 % less than 15 W *2 |
---|
Structure | Waterproof (equivalent to IP67) |
---|
Material | Aluminum die-casting |
---|
Mass | Approx. 1.5 kg |
---|
Mounting method | Installation on the ground (fixed by anchor) |
---|
I / O cable | Waterproof connector One-touch lock connector (made by Nanaboshi Electric) NRW-2421PF11 (connector diameter : approx. 34.1 mm) Twisted cable with shielded (made by Fuji Electric Wire) FKEV-SB 0.3sq×10 pair (outer diameter : approx. 10.5 mm) |
---|
*1 Initial setting values are 80, 250, 400 gal *2 When connected with SW-74 (74SI) , power is supplied from SW-74 (74SI)
|