The MIC 10 Portable Hardness Tester..Quick and versatile hardness testing using the UCI principle
- The MIC 10 Series of portable hardness testers that weigh less than 11 ounces
- Operate on 2 standard "AA" batteries
- Operation based on the UCI Principle
- Test in any direction.
- A selection of interchangeable probes are available having loads from .1 to 10.0 kgf to vary the indentation size from one that can not be visually detected to a larger indentation required for testing coarse grain materials.
Advanced Instrument Features:
Scales HRC, HRB, HB, HV, Tensile Strength with MIC-2010 probe only
- A single key press toggles between display of average or single values
- Easy to read backlighted LCD display
- HI/LO alarms
Microdur Probe Models and Styles:
Ten Probe models in four styles and with loads from .1 kgf to 10 kgf are available.
Calibration parameters specific for each probe are stored internally. This allows the
operator to freely interchange probes with the instrument.
Model
Load
Style
Major Diameter
Total height with connector
MIC-2010
MIC-205
MIC-20110 kgf
5 kgf
1 kgfStandard
Lenth
Handheld.75"
(19 mm)6.4"
(162 mm)
MIC-205L
MIC-201L5 kgf
1kgfExtended
Length
Handheld.75"
(19 mm)7.5"
(190 mm)
MIC-205S
MIC-201S5 kgf
1 kgfShortened
Length
Handheld.75"
(19 mm)3.5"
(90 mm)
MIC-211
MIC-2103
MIC-2101.8 kgf
.3 kgf
.1 kgfMotor
Probes1.52"
(38.5 mm)8.6"
(217 mm)
* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr
입금계좌 : 국민은행 298737-04-004838 예금주 :아이에스테크주식회사
*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
- 배송료 : 10만원 미만시 착불 발송 됩니다.
배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.
- 퀵서비스 요청시 착불 배송이 원칙 입니다.
- 택배 마감 시간은 오후 4시 입니다.
- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.
- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.
- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.